RENTING OF VENTILATION EQUIPMENT FOR SANITATION
BVG series Air box
Our BVG Air box, it ́s a useful tool for the ventilation and extraction of gases and bad odours from manholes and inspection conduits.
- Casing in galvanized on welded steel sheets
- Pipe fitting on both sides – Ventilator with an incorporated motor
- Self-extinguishing thermal-acoustic insulation M-1
- Speed regulator that allows controlling air volume
- It can be supplied with handles and wheels
- Self-extinguishing plastic pipes reinforced with steel
- Up to 11000 m3/h flow
- Three phase and single phase functioning
- E.C. Certificate
- Uses: sewers, sewage treatment plants, collectors, etc
CVG series - Sparkproof
Our CVG spark-proof is a gas exhauster, designed to remove gases and bad smells from inspection wells and collectors in the presence of potentially explosive airstreams.
It’s very frequent for workers to face bad smells when entering wells and collectors or any confined spaces in general, although a more serious issue is that they are also often exposed to harmful gases, and sometimes it is impossible to be aware of their presence since they are odourless.
Some of those gases are not just nocive, they could also be lethal within seconds. Gases at wells and collectors are not only dangerous because of their inhalation but they can also be highly explosive (e.g.: methane).
Despite of this, it ́s sadly how this kind of accidents which commonly end in death, still occurs due to the lack of information and not using suitable equipment when entering confined spaces.
Motovent: Autonomous gas exhauster
- Casing in galvanized on welded steel sheets
- Pulley transmission
- Pipe fitting on both sides and retractable handles
- Anti-puncture wheels with breaks
- Diesel or petrol engine.
- Self extinguishing plastic pipes reinforced with steel
- From 6500 m3/h flow up to 11000 m3/h
- E.C. Certificate
- Uses: sewers, sewage treatment plants, collectors, etc.
Pozovent
- Manufactured in galvanized steel with an EPOXI paint protection
- A 3mm protection grid for blade propellers.
- It incorporates an EPDM air joint that allows a perfect connection to the opening of the well
- Easily adapted to any manhole
- Autonomous equipment that does not need a generator.
- Easily adapted to any manhole
- From 1800 to 8000 m3/h flow
- E.C. Certificate
Available in 3 versions:
- Petrol engine of 4 kw
- Petrol engine of 5kw BRIGGS STRATON QUALITY
- Single phase electric motor of 0.75 kw
CLIMATIZATION EQUIPMENT FOR RENT
HEATING GT SERIES 95-160kw
- Stainless steel chamber and exchanger
- Centrifugal fan
- Prepared for air outlets through distribution outlets or orientable vent.
- Efficiency over 85 %
- Burner included
- Three phase functioning
- E.C. Certificate
- Ideal for construction areas, heating of marquee and industrial
areas.
Options:
- It can be attached to a trailer for easier transportation and handling.
- DWA Series diesel tank of 700 or 1000 litres (double galvanized steel wall on the outside, polyethylene inside, it includes a suction kit)
- Self extinguishing plastic pipes reinforced with steel
HEATING GC SERIES 64-160kw
Equipment specially designed to be used as well as in horizontal as well as in vertical position.
- Fixable or portable versions
- Stainless steel combustion chamber and interchanger
- Axial flow fan (series) or centrifugal (optional)
- Prepared for air outlets through distribution outlets or orientable vent.
- Efficiency over 85 %
- Three phase and single phase functioning
- E.C. Certificate
- Used for live stock and green houses.
COOL-315 COOLING SYSTEM
- Equipment with axial flow ventilation (helical)
- Pulley transmission
- Wood fibre humidifying panel inside the prelacquered or stainless steel grid.
- Front deflector with orientable vent
- Speed regulator
- Total or partial construction in galvanized (painted), prelacquered or stainless steel AISI 304
- Rigid cellulose humidifying panel: KM-505 with galvanized steel channel and frame.
- Equipped with wheels for easier mobility
- Up to 14000 m3/h flow
- E.C. Certificate
- Ideal for construction sites, cooling of marquees and industrial areas.
VFX SERIE VENTILATION AND EXTRACTION
- Monoblock assembly
- Entirely made with galvanized steelCurved MODEL T or flat blade propellers (reversible) Model TR
- Automatic shutter
- Galvanized wire front protection
- Motor: Protection IP-55
- For operation in both directions, the equipment is supplied with flat
- blade propeller Mod. TR (reversible)
- Up to 48000 m3/h flow
- Three phase and single phase functioning
- E.C. Certificate
- Ideal for construction sites, ventilation of marquees and industrial areas
GALLERY OF EVENTS
